November 2018
| November 15, 2018. The square cornered trunk lid has been converted to a round corner. Note that Todd went the extra mile to recreate the rounded crimped over edge. It is as if this trunk was originally a round-corner one. |  |
| The entire quarter panel is removed in preparation for the replacement. |  |
| A section of the wheel housing was bent behind the quarter panel, it will be replaced. |  |
| Here is the replacement panel, carefully removed by drilling its original spot welds. |  |
| . |  |
| Here the sectioned wheel well has been replaced, and the repair is undetectable. Todd is a wizard with this! |  |
| . |  |
| Do you see the spliced in section of the wheel well? Neither do I! |  |
| Quarter installed, no more wrinkles, rivit seams, and bondo. |  |